Thermal Analysis of a Hollow-Shaft Water-Cooled Permanent-Magnet Motor

Authors

  • Wenzheng Liu School of Shandong Jiaotong University, Jinan 250000, China

DOI:

https://doi.org/10.54691/k5zz0848

Keywords:

Permanent-magnet propulsion motor; hollow shaft; water cooling; cooling-channel geometry; computational fluid dynamics; thermal analysis.

Abstract

With the increasing demand for compact, high-power-density underwater propulsion systems, heat dissipation in permanent-magnet motors has become an increasingly important issue, and cooling performance directly affects motor service life and operational safety. Conventional approaches, including housing water jackets, air cooling, and hybrid cooling, may involve long heat-transfer paths, structural redundancy, or limited cooling capacity. This study proposes an internal cooling structure based on a hollow shaft, integrating the coolant passage with the rotor shaft system to shorten the rotor-side heat-transfer path while improving heat dissipation and maintaining compactness and engineering applicability. Computational fluid dynamics (CFD) is used to calculate the temperature fields of a permanent-magnet motor with different water-channel configurations under rated operating conditions. The results show that the smooth axial channel provides better overall hydraulic and thermal performance than the helical channel: its maximum temperature is 26.24 °C, compared with 27.04 °C for the helical channel, while the maximum inlet–outlet pressure difference decreases from 1058 Pa to 163 Pa. With a 50-mm hollow-shaft cooling channel, the maximum temperatures of the stator core, winding, permanent magnet, and shaft are 63.34 °C, 68.03 °C, 30.86 °C, and 34.25 °C, respectively, substantially below those of the solid-shaft baseline, in which all key components exceed 247 °C. These results indicate that a hollow-shaft cooling design with a smooth axial channel can improve heat removal from the rotor region and reduce the risk of permanent-magnet overheating under the investigated conditions.

Downloads

Download data is not yet available.

References

[1] Gundabattini, E., Mystkowski, A., Singh, R. R., & Gnanaraj, S. D. (2021). Water cooling, PSG, PCM, cryogenic cooling strategies and thermal analysis (experimental and analytical) of a permanent magnet synchronous motor: A review. Sādhanā, 46, Article 124. https://doi.org/10.1007/s12046-021-01650-z.

[2] Gai, Y., Kimiabeigi, M., Chong, Y. C., et al. (2019). Cooling of automotive traction motors: Schemes, examples, and computation methods—A review. IEEE Transactions on Industrial Electronics, 66(3), 1681–1692. https://doi.org/10.1109/TIE.2018.2835397

[3] Zhu, Z. Q., & Liang, D. (2022). Perspective of thermal analysis and management for permanent magnet machines, with particular reference to hotspot temperatures. Energies, 15(21), Article 8189. https://doi.org/10.3390/en15218189

[4] Usca-Gomez, H. G., Puma-Benavides, D. S., Zambrano-Leon, V. D., et al. (2025). A review and case study of cooling methods: Integrating modeling, simulation, and thermal analysis for a model based on a commercial electric permanent magnet synchronous motor. World Electric Vehicle Journal, 16(8), Article 437. https://doi.org/10.3390/wevj16080437

[5] Tang, Y., Sun, S., Yu, W., & Hua, W. (2023). Thermal analysis of water-cooling permanent magnet synchronous machine for port traction electric vehicle. Electronics, 12(3), Article 734. https://doi.org/10.3390/electronics12030734

[6] Jeon, K., Park, M., Park, J., et al. (2023). Analysis of cooling characteristics of permanent magnet synchronous motor with different water jacket design using electromagnetic–thermal fluid coupled analysis and design of experiment. Machines, 11(9), Article 903. https://doi.org/10.3390/machines11090903

[7] Zhao, H., Zuo, W., Li, Q., et al. (2023). Thermal–hydraulic performance optimization of the spiral cooling channel in surface type permanent magnet synchronous motor. Journal of Thermal Analysis and Calorimetry, 148(19), 10345–10355. https://doi.org/10.1007/s10973-023-12390-z

[8] Chen, W., Mao, Z., & Tian, W. (2024). Water cooling structure design and temperature field analysis of permanent magnet synchronous motor for underwater unmanned vehicle. Applied Thermal Engineering, 240, Article 122243. https://doi.org/10.1016/j.applthermaleng.2023.122243

[9] Wang, D. X., Wen, K., & Chen, G. (2025). Design and analysis of a water-cooling structure for a low-speed outer-rotor permanent magnet motor. Journal of Shenyang University of Technology, 47(4), 509–516. (In Chinese).

[10] Lee, K. H., Cha, H. R., & Kim, Y. B. (2016). Development of an interior permanent magnet motor through rotor cooling for electric vehicles. Applied Thermal Engineering, 95, 348–356. https://doi.org/10.1016/j.applthermaleng.2015.11.022

[11] Yang, Y., Bilgin, B., Kasprzak, M., et al. (2017). Thermal management of electric machines. IET Electrical Systems in Transportation, 7(2), 104–116. https://doi.org/10.1049/iet-est.2015.0050

[12] Lindh, P. M., Petrov, I., Semken, R., et al. (2016). Direct liquid cooling in low-power electrical machines: Proof-of-concept. IEEE Transactions on Energy Conversion, 31(4), 1257–1266. https://doi.org/10.1109/TEC.2016.2597059

[13] Khalesidoost, S., Faiz, J., & Mazaheri-Tehrani, E. (2022). An overview of thermal modelling techniques for permanent magnet machines. IET Science, Measurement & Technology, 16(4), 219–241. https://doi.org/10.1049/smt2.12099

[14] Nonneman, J., T’Jollyn, I., Vanhee, S., & De Paepe, M. (2023). Thermal modelling and validation of a direct rotor cooled permanent magnet electric machine. In Proceedings of the 2023 IEEE International Electric Machines & Drives Conference (IEMDC). San Francisco, USA. https://doi.org/10.1109/IEMDC55163.2023.10238978

[15] Petrov, I., Credo, A., Canseven, H. T., et al. (2025). Direct liquid cooling in compact machines: Advantages and limitations. Applied Thermal Engineering, 273, Article 126461. https://doi.org/10.1016/j.applthermaleng.2025.126461

Downloads

Published

20-11-2026

Issue

Section

Articles

How to Cite

Liu, W. (2026). Thermal Analysis of a Hollow-Shaft Water-Cooled Permanent-Magnet Motor. Frontiers in Science and Engineering, 6(11), 12-25. https://doi.org/10.54691/k5zz0848